Parts & Accessories
All you need for cycling data, all together at once! The Wahoo RPM Speed and Cadence sensors are both a sleek, wireless, and magnet-less solution. Each mounts easily to your bike and the Bluetooth Smart and ANT+ duel band technology allows you to connect and display data on both smartphone and bike computers. - Dimensions (LxWxH): 1.25" x.75" x 1" - Weight: 7 grams (without mount) - Battery: CR2032 - Battery Life: Up to 12 months - Water Rating: IPX7 (waterproof up to 5 ft) - Wireless Signal Strength: Up to 10 feet - Note: Speed Sensor is NOT compatible with spin bikes
Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability. - No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world. Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.
Our Trainer Axle is designed to adapt your Surly MDS/Gnot Boost thru-axle-equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - This axle is for Surly bikes with the MDS/Gnot Boost system. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum, and hard-anodized for rugged durability. - No special tools required. Design allows for wheel installation or removal using your standard 5 mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.
Giant's Chopping Block lifts your front wheel so it's even with your rear wheel while on a trainer. It's compatible with 26-inch and 700c wheels and has a stable, anti-skid base.
Of course you love your Omnium Trainer, but you’re left wondering how you could possibly love indoor cycling training even more. Easy, our non-slip and water-repellent (aka sweat) Floor Mat is designed to keep you safe and protect your floors while in your cycling cleats indoors. And because your cycling training plan asks for incredibly intense efforts, the Floor Mat can ensure firm contact with the ground and prevent movement during leg-busting intervals. Add a Sweat Guard to your indoor cycling collection and you’ve got a training party! - Non-slip surface keep you safe while in cycling cleats - Protects floors from sweat and bike grime - Water-repellent surface does what it was designed to do – keep sweat off your floor - Compress-ability ensures trainer stays put during intense efforts - Easily rolls up for storage - Cleans easily with soap and water - Absorbs noise and vibration - Enhances overall stability of any indoor trainer setup - 4mm (5/32?) thickness is optimal balance of support and storage
Of course you love your Omnium Trainer, but you’re left wondering how you could possibly love indoor cycling training even more. Easy, our absorbent Sweat Guard is designed to keep your carbon, aluminum and steel frame and components safe from corrosive sweat while mimicking your favorite spin class at home. And because your cycling training plan asks for incredibly intense efforts, the Sweat Guard ensures not a drop of sweat will hit your frame during leg-busting intervals. Add a Floor Mat to your indoor cycling collection and you’ve got a training party! - Ultra absorbent terry cloth material - Protects carbon, aluminum, and steel frames and components - Adjustable to fit most any bike - Simple setup and removal with Velcro handlebar mounts and elastic seatpost strap - Machine washable, cold
This handlebar bracket has been developed so you can attach a tablet to your handlebars. The design provides a safe distance so that no sweat falls on the screen while you are training. - Suitable for handlebars with a diameter ranging from 26mm to 35mm - Adjustable to different tablet sizes: length 182-267mm, width 112-197mm, max. thickness 13mm
- Adapter for Tacx Direct Drive trainer - 01 is compatible with 142 x 12mm and 148 x 12mm - 02 is compatible with 135 x 10mm - 03 is compatible with 135 x 12mm (w/5 mm spacer included with every Tacx Direct Drive trainer), 142 x 12mm and 148 x 12mm - 04 The thru axle adapter kit is for bikes with a 12 mm thru axle. The axle adapter is required to couple the rear stay with the thru axle mount on a Tacx NEO or FLUX Smart trainer.
$44.99 - $59.99
The E-Thru Trainer Axle allows the use of a mountain bike in a Tacx trainer. These axles are only suitable for Tacx classic trainers.
The Skyliner is a front wheel support for use with Tacx classic trainers. It raises and supports the front wheel for a natural cycling position and increased stability. It also serves as a handle to carry the trainer.
The Tacx Sweat Cover protects your bike from corrosion caused by perspiration. It is made from absorbent textile to catch and retain perspiration. Its clever design fits all bikes and enables easy mounting.
A sweat cover with a pocket for your smartphone. The sweat cover protects your bike against perspiration and enables the use of a phone while training. The Tacx sweat cover is made from absorbent textile to catch and retain perspiration. Its clever design fits all bikes and enables easy mounting. Suitable for a variety of phone sizes - max. length 138mm, max. width 68mm.
The Tacx trainer tires have been developed specifically for riding indoors on bike trainers. The special rubber minimizes the risk of overheating, slipping, and wear and tear. They are also quieter than regular rear tires on both road and mountain bikes. Tacx trainer tires are not suitable for outside riding.
• Plastic riser block allows the position of front wheel at one of two heights
Replacement straps for Sunlite FlatForm II pedals - Strap size: 340 x 55mm
• 35.5-inches x 79-inches • Black
Look, your child is destined for greatness. We won't dispute that. But, why wait until they can walk for them to rock their awesomeness? If they're crawling, they're ready to explore the world. Attach the Strider Rocking Base to a Strider 12 Bike and get them rocking. The rocking base doesn't just familiarize them with a bike, the rocking motion helps develop their balance, spatial awareness, and core strength. No batteries. No annoying sounds. Just pure, rocking fun. - Compatible with the Strider 12 Classic, Sport, and Pro Balance Bikes - When the Strider 12" Bike is attached this product is intended for ages 6 months – 5 years old for Strider Sport and Pro, and ages 6 months – 3 years for Strider Classic.
Adapts a thru axle hub bike for a Saris bike trainer. - Trainer Thru Axle Adapter For Saris Trainers - Thread pitch: 1.00 & 1.75 What's Included: - Thru axle - Washers - Endcaps with bolts Trainer Compatibility The Saris Trainer Thru Axle Adapter is designed for indoor use on Saris trainers only and should not be ridden outdoors. Compatible with current basic trainers. Not compatible with CycleOps PowerSync trainers. Contact us with trainer compatibility questions. Bike Compatibility Many bike manufacturers do not publish thread pitch or hub spacing online. If you are unclear as to what type of thru axle your bike uses, please contact us.
Connect your PC to CycleOps VirtualTraining.
The Saris Leveling Block keeps your bike level with your trainer. - Adds stability to your training ride. - For use with any rear wheel-mounted trainer. - Raises front bicycle tire 1.1 inches (2.8 cm) off the ground
Adjust resistance on Mag trainer without leaving the saddle. - Quick Release mounting system fits most stems. - For use with the Mag bike trainer only
Protects your floor from sweat and bike grime. Product Features: - Protects your floor from sweat and bike grime. - Keeps your trainer from "walking" during intense workouts. - Durable construction absorbs vibration and noise. - Training mat measures 65 x 36 inches. - Black PVC foam gives the training mat superior sound absorption. - Resistant to moisture, and easy to clean with soap and water when necessary.
Keeps corrosive sweat from reaching your frame. - Cell phone pouch included.
Trainer Mission Control Every training room needs a control center, and the TD1 is more than equipped for the job. Featuring built-in power strip with 2 AC and 2 USB outlets, this indoor trainer desk was designed to keep everything you need charged, organized and close at hand. Its roomy 12" x 20" table top is made from laminated birch for easy clean up, and is supported by stainless, corrosion-resistant steel sourced from America’s heartland. And as part of the Saris trainer eco-system, the TD1 is a perfect complement to the MP1 trainer platform. After just one ride with a dedicated trainer desk, you’ll ask yourself how you ever rode indoors without one. - Stay Charged: built-in power strip keeps training necessities nearby and powered up. - Pick Your Height: adjustable for wide range of bikes and training configurations. - Easy Cleaning: laminated birch wood top makes for easy clean-up post-ride. - Steamlined Look: built-in cable management and stainless steel hardware are both functional and eye-pleasing. - Enhanced Experience: a great addition to indoor training. Specs - Base: 13-inches wide x 36-inches Depth - Desk Top: : 12-inches Width x 20-inches Depth - Adjustable Desk Height from Floor: 40- to 55-inches - Materials: Laminated birch table top supported by a steel frame, featuring stainless steel and corrosion-resistant hardware - Cord Length: 6- foot AC cord - Built-in power strip with 2 AC and 2 USB outlets - Built-in cord retention clips for easy cable management and a clean look.
TRAINER THRU AXLE ADAPTER FOR SARIS TRAINERS WHAT'S INCLUDED: - Thru axle - Washers - Endcaps with bolts - The 148x12mm adapters also come with a shorter bolt action slider tube. TRAINER COMPATIBILITY The Saris Trainer Thru Axle Adapter is designed for indoor use on Saris trainers only and should not be ridden outdoors. Compatible with current basic trainers. Not compatible with CycleOps PowerSync trainers. Contact us with trainer compatibility questions. BIKE COMPATIBILITY Many bike manufacturers do not publish thread pitch or hub spacing online. If you are unclear as to what type of thru axle your bike uses, please reach out to your local bike shop or the bicycle manufacturer directly. Both 148x12 Thru Axle Adapters are compatible for both 142 and 148mm bikes. 148x12 Thru Axle Adapter, 1.5 Thread Pitch (9733T) works for: - 148 x 12mm - 142 x 12mm - 1.5 thread pitch
Everything you need for the best indoor trainer experience possible. - Can be used across a wide range of trainer setups. - Includes Trainer Mat, Climbing Block and Saris towel.
- Includes clutch knob and L-bolt - Basic Trainer Clutch Knob is compatible with any Wind, Mag, Mag+, Magneto or Fluid trainer that already uses L-bolt - Magnus Clutch Knob should only be used with Magnus Smart Trainer - Watch our video to learn more
Keep your handlebar organized and your devices secure with the LW-STD (22.2/25.4/28.6mm) from Minoura. - Alloy clamp for mounting your own device on handlebar or stem - Lightweight and rustproof aluminum construction - Hex wrench required for instillation and removal - Clamp body has (1) M5 Thread hold in center - 22.2 mm-28.6 mm diameter range
The TPH-1 Tablet Grip from Minoura is the ultimate tablet holder for indoor training. Fitting a diameter between 28mm and 35mm, this stand will fit most bicycles. - Perfect accessory to use with LiveTraining Apps, The Sufferfest videos, or other media - SM clamp easily mounts or dismounts from the handlebar or tube - Spring-loaded clamp system is simple to use and securely holds your device in place - Holds from a 7.9 to 9.7 inch screen with 360 degree rotation system - Can mount to your repair stand so you can easily reference the Internet when working on your bike
Page 1 of 2 Next page