Parts & Accessories

B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Single bottle mount with two slotted holes for adjustments up to 4mm +/- 10mm - Designed to maximize bottle capacity on small frame bikes and dual suspension frames

B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Three slots for additional adjustments over the B-RAD 2 base - Compatible with triple bottle mounts on forks or frames, use neoprene pad and zip tie for use with standard bottle cage mounts

B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Long, four-slotted mount allows two, smaller bottles to be mounted in-line - Compatible with triple bottle mounts on forks or frames, use included neoprene pad and zip tie for use with standard bottle cage mounts

The B-RAD Accessory Strap Mount is designed to add an additional strap point for tire levers, tubes or CO2 cartridges. Mounts to bottle bosses, or to the B-RAD base for additional carrying options. - Mounts to bottle bosses, or to the B-Rad base for additional carrying options - Main strap is 50mm wide and holds loads 75-120mm diameter (3 - 4.75 inches) - Cradle strap is 40mm wide and 350mm long for supporting loads

B-RAD Bottle Mounts allow for cargo customization and cargo optimization. They are designed to work in tandem with B-RAD Base mounts to keep cargo on the bike and off the back. - Compatible with any bike frame that has 2 standard 64mm spacing bottle cage mounts (most modern frames) - 6061-T6 aluminum brackets, stainless hardware - Weight (no hardware) – 20g - Maximum load 1700g - Designed to carry two bottles or accessories off of one B-RAD base

The B-RAD pump bag protects your frame pump from water and dirt ensuring it is working when you need it. - Mounts to the B-RAD system or on its own - Dimensions: 12 in x 2.5 in x 2.5 in (30 cm x 6.5 cm x 6.5 cm)

Replacement hardware, bolts and nuts for Wald baskets. Works with Wald Basket models: 520, 520GB, 535 and 535GB

Common on European utility bikes, a front wheel stabilizer makes loading front racks simpler. It is a spring connecting the fork to the down tube. It adds a subtle self centering action to the front wheel, making loading and unloading of a bike with a basket, or say, our Porteur Rack much easier. The spring also offers some resistance to steering, so it counteracts deflections from hitting potholes and road debris. - Mounts to the back of the fork crown via brake bolt or through bolt - Fork crown mount diameter is made to fit an M6 bolt - common on nutted calipers - Use Sheldon's Fender Nuts to work with recessed brake bolts - Rust resistant and includes all required brackets and hardware - Available for Small (31.8mm and smaller) and Large (38-62mm) sized downtubes

Mudgard Bracket for Rear Carriers

This Tubus dropout extension adapter allows you to mount racks further back on the frame. It also allows you to mount traditional racks on bikes with disc brakes. - Weight: 66g - NOTE: This item is not compatible with any “EVO” Tubus racks

QuickClick mount for racing type saddles. Works with all Topeak Wedge Bags. - Material : Injected Nylon - Weight: 30g / 1.06 oz

Topeak's Cargo Net works with the Trolley Tote or MTX Rear Basket (sold separately). Make sure your goods stay in place on those bumpy rides home!

For BabySeat II Racks and MTX Tubular Racks (34.5 cm in length for small bike frames). - If you have a small frame bike and cannot install Topeak rack or BabySeat in recommended position (2 or 3 degrees from horizontal), please use the 34.5cm extra long mounting bracket arm for proper installation.

Adapter for mounting the Topeak MTX rear basket to any MTX QuickTrack compatible rack.

Topeak Elementa tool/tube strap provides a minimalist, convenient way to carry your essentials. Individual straps hold tools, Co2 tubes and levers securely. The Elementa Strap can be attached to seat rails, top or down tubes, or anywhere else on the frame. - Attach to saddle rails, seatpost, or downtube with hook and loop fastener - Anti-slip and scratch-free fabric protects your bike

Omni QuickTrack Adapter attaches to a standard rear rack or Racktime* system platform allowing the use of popular Topeak TrunkBags and rear baskets. Adjustable mounting brackets fit rear rack widths from 90mm to 120mm with 10mm to 12mm rack tube dimensions. - Attachments: Rear rack deck - Material: Engineering grade polymer - Max Load: Limited to rack max loading rating - Size: 32 x 9.4 x 6.1cm - Weight: 230g / 8.11oz Compatibility - Fits rear rack without top plate and spring clip, - Rear rack width 90mm - 120mm, - Rack tubes, 10mm to 12mm diameter - Compatible with Topeak MTX / RX TrunkBags and MTX rear baskets *Racktime is a registered trademark of tubus carrier systems GmbH.

Solid aluminum dropper post mount to attach rear bikepacking bag, larger saddle bag, bottle cage, tail light, and more.

Fast and easy attachment of Topeak handlebar bags. - Clamp: Fits 25.4/28.6/31.8 mm Handlebars (shims included)

Topeak's front basket handlebar fixer fits standard bikes or eBikes with display units. - Fits up to 1-inch handlebars

Topeak handlebar bag fixer for eBikes with display units.

Take your bike adventures even further with a versatile mount cage to pack larger gear on your bike. The included tie-down straps provide the ability to carry a DryBag, sleeping bag/pad, stuff sack, or any round shaped gear on your bike frame or fork with bottle bosses. A four-hole mount design offers height adjustment of your load for better balance. VersaMount clamps also provide easy installation and flexible mounting options. - Fits tubes 20-60mm. - Engineering grade polymer - 64 mm mounting height adjustable - Weight: 128g - Max load: 3kg / 6.61lb - Dimensions: 22 x 12 x 7cm / 8.7 x 4.7 x 2.8-inches

The Topeak Backloader Wishbone attaches to the saddle, and provides anti-sway for large saddle bags. In addition, the Wishbone has bottle cage mounts to allow 2 additional bottles to be carried. A handy accessory to add to your bikepacking repertoire that keeps the backloader or any large seat bag from swaying back and forth. - Fits rear bags 18cm/7" wide - Bottle cage bolts included, max load 4.4lbs - Mounts to any standard seat rails. Not compatible with monorail or spring/bumper saddles

Thule's Pack n' Pedal Side Frames mount quickly and easily to the sides of their Pack 'n Pedal Tour Rack (sold separately). They allow you to use any model of pannier for increased luggage capacity and a lower center of gravity.

Forget about calling a U-haul and use the Batten Straps to secure any and all cargo to the GSD. Daisy-chained together or individually, the two 3-meter long straps quickly fasten just about any odd-shaped bulky item. Whether you’re tying down a push bike or carting around extra luggage, the Batten Straps are an essential tool for the GSD. - Load-bearing straps easily secure heavy boxes, a suitcase or even a folding bike to your GSD - Fastens up to 100 kg (220 lb) of cargo - Bears loads up to 300 kg (661 lb) - Buckle is easy to adjust yet firmly holds cargo in place - UV and weather resistant for all-weather carrying - Includes two 3-meter (9.8 ft), 1" wide straps - Combine with the Sidekick Lower Decks, Clubhouse or Shortbed Tray for extra cargo support

The Pannier Adapter is an accessory's accessory—but a very useful one. When using Cargo Hold 37 Panniers on your Tern GSD, the Pannier Adapter lets you install a child seat in the rear position of the rack and still attach the Cargo Hold 37's outer straps together, to make sure they are not dangling around while you are riding. Simple but effective. - Secures a pair of Cargo Hold 37 Panniers when used in conjunction with a child seat in the rear position on the GSD - Simple and robust design, made of durable nylon strap and Fidlock magnetic buckles - Quick and easy installation with Velcro fastening - Small and lightweight for convenient storage in the pannier pocket when not in use

Our bikes and accessories were designed to help you carry stuff, but sometimes you just want to carry less. The Quick Release CMT is a quick-release bolt that makes installing and removing our Combo Mount-compatible racks easy, without tools, and in under a minute—so you can quickly change the bike setup if the rack is temporarily not needed, or reduce the bike package size to fit into smaller vehicles or storage spaces. - Designed for Tern bikes equipped with a Combo Mount - Easily install or remove front-mounted racks and accessories in under a minute - No tools required - Hassle-free option to switch accessories according to your needs

Almost every Tern bike is built with a hidden Easter-egg. Pop off the head-badge (gently!) to find two screw holes. Attach a Luggage Truss, and mount cargo conveniently on the front of your frame. With your cargo mounted on the frame instead of the fork, steering is nimble and responsive. By keeping your backpack, groceries and essentials up front, they’re accessible when you need them. Enjoy the smart (and secret) way to carry your gear. - Head-tube-mounted design keeps weight on your frame, instead of your fork, for improved steering stability - KLICKfix quick-release connector lets you attach and detach bags and baskets at the push of a button - Low-profile design doesn’t affect bike folded size - Integrated lock keeps your bags and baskets secure - Compatible with KLICKfix bags, racks and baskets

Spruce-up a well-loved Dummy bag with replacement parts from Surly.

Spruce-up a well-loved Dummy bag with replacement parts from Surly.

Spruce-up a well-loved Dummy bag with replacement parts from Surly.