Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Parts

$2.99
- For MTB levers - 7mm x 1mm - Aluminum construction
$2.99
- Oversize 10mm - Fits new style MTB & BMX levers - Aluminum construction
$2.99 - $6.99
Shifting cables for Road/Mountain bikes.
$2.99
• Compatible with most side pull and center pull brakes • All weather compound
$2.99
M5 bolts to mount your flat mount caliper to the frame. Sold as a QTY of 2.
$3.00
- MC bodies are bare (no guts, reservoir, lever, etc.) - Stroker Series bodies come with bar clamp and bolts
$3.00
KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs. - Compatible with KMC and Shimano 10-speed chains - Includes 2 pairs
$3.00
KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs. - Compatible with KMC K710 and K710SL chains - No tools needed
$3.00 - $3.19
Finish off that great road bar tape job with Origin-8's Rubber End Plugs. These plugs come in a variety of colors to dress up your rig and fit most handlebars.
$3.00
- Preload collar for adjusting tension on bottom bracket bearings - For Race Face 30mm Cinch System cranks only
$3.00
Replacement lower hardware for Rockshox forks.
$3.00
Internal components for servicing the Reverb and Reverb Stealth mechanism.
$3.00
Shimano Mountain Deore XT M8000 Shift Pod Cable Adjusting Unit
$3.00
Shimano E-tube Dummy Plugs - Extra E-Tube plugs for sealing unused ports on shifters or junction boxes - Sold each
$3.00
Shimano Front Derailleur Cable Fixing Assembly
$3.00
- Alloy spacer converts an 8-speed rear hub to use a 7 speed cassette - Range: 4mm - Color: Silver
$3.00
- Steel cable noodle with alloy end caps - Includes plastic liner
$3.19
- Includes everything needed to mount non-threaded brake pads to cantilever brake arms
$3.26
KS Dropper Post Service Parts
$3.26
Parts for the service of the seal and restore the smooth cycling of KS dropper posts.
$3.39
Standard replacement star nuts for threadless steerers.
$3.39
- Size: 1/2x1/8 & 3/32 (set) - Links: 1 each per bag
$3.39
- Standard steel replacement
$3.40
Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Driver Spring - Ratchet EXP
$3.40
Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Spacer Sleeve - 10.1mm, for 3-pawl
$3.40
Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Star Ratchet Spring
$3.41
Bulk packaged, corrosion resistant stainless steel fasteners.
$3.47
Campagnolo Miscellaneous Rear Derailleur Parts, Derailleur Bolt Bushing
$3.49 - $4.49
These double ended cables have a unique disc style head that fits Simplex/Huret and a normal Shimano/SRAM head. - Galvanized - Pre-stretched - Double ended - Cable Head: Shimano/SRAM, Huret/Simplex - Defined Color: Silver - Diameter: 1.2mm - Double Ended: Yes - Disc style Huret/Simplex end is slightly smaller than original spec, but is functionally compatible with Suntour X-Press shifters
$3.49
Basics brake cables provide value on a budget. - Pre-stretched - Double ended for compatibility with SRAM/Shimano road and mountain brakes - Color: Silver - Diameter: 1.6mm
$3.50
Giant's Derailleur Cable And Housing Set contains all the parts you need to get your bike's shifting back on track. The galvanized cable is double-ended for use with Campagnolo or Shimano/SRAM drivetrains. The full-length housing includes all necessary aluminum ferrules.
$3.50
Giant's Brake Cable And Housing Set contains everything you need to get your braking power back. The galvanized cable is double-ended for use with road and mountain bikes and is compatible with almost all brakes. The full-length housing includes all necessary aluminum ferrules.
$3.50
Giant's Slick brake cable is pre-stretched for high responsiveness. This galvanized cable is double ended for use with road and mountain bikes and is compatible with almost all brakes.
$3.50
Hope Brake Lever Parts
$3.50 - $3.99
The Slic-Kable features a low friction inner wire for smooth braking. - 65-inch length
$3.57
Complete remotes and remote components for KS dropper posts.
$3.57
Parts for the service of the seal and restore the smooth cycling of KS dropper posts.
$3.68
Replacement M8 Nut/Bolt Set for Wheels Mfg derailleur hangers. - M8 chainring bolt style fastener - Use with 5mm hex wrench
$3.79
- Includes everything needed to mount hex nut style (non-recessed) caliper brakes - Model: Front
$3.94
Aluminum headset stack spacers precision cut to ensure proper headset function. - Precision cut for proper function
$3.94
Aluminum headset stack spacers precision cut to ensure proper headset function. - Precision cut for proper function
$3.94
Aluminum headset stack spacers precision cut to ensure proper headset function. - Precision cut for proper function
$3.95
The Tanpan ferrule converts standard Tanpans to Tanpan inlines. - Coverts Tanpan into Tanpan Inline
$3.99
The Odyssey stem bolt pack features 6 - 6mm stem bolts that are M8 x 1.25mm thread.
$3.99
Origin-8 1mm Disc Brake Washers. Works with most disc brake calipers. Ideal for mounting/spacing applications. - Stainless steel - 6mm I.D. - 10 per bag
$3.99 - $20.00
Available in the most common sizes and thicknesses-in small or bulk quantities, Problem Solvers headset spacers help riders get their stack height just right. - Made from Aluminum, anodized or polished finish, without logos - 1-1/8" Diameter - S.H.I.S. Stem Clamp Diameter: 28.6mm
$3.99 - $5.15
The Problem Solvers Brake Boss Plugs are perfect for when you've removed your cantilever or linear-pull brakes in order to run disc brakes or a fixie setup. These plugs thread into the empty frame bosses and lend a clean look, while also protecting the threads inside the frame from corrosion.
$3.99
- MTB or Road - 1.5 x 2667mm - Galvanized
$3.99
• With bolt & nut • 1 1/8-inch = 28.6mm • 1-inch = 25.4mm
$4.00
380mm long, single-ended straddle for mountain cantilever brakes