Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Other

Profile Design 35c+ Carbon Extensions
$214.00
The 35c+ extensions offer a slightly higher rise then the orginal T4c and are half the weight - saving 12g in their uncut form. The new range of extensions have evolved from our well proven T-Series. They have been designed to offer distinct fit options. We have also adopted a new naming system whereby the name gives the angle material of the extension. Thus 35c+ is a 35° bend in aluminium. Performance: The sole purpose of extensions is to provide a comfortable position for the rider's hands relative to the armrests. They enhance performance by allowing the rider to relax into their optimal position, which is why we provide different fit options so each rider can chase their best performance. Fit Data: - Extension Shape: A 35 degree ski-bend extension suited to riders who prefer to adopt a wrist angle that is on the low side of the neutral range. - The 35c+ is a straight 35° bend. - Length: 400mm - Outer Diameter: 22.2mm - Inner Diameter: 19.4mm - Construction: Carbon - Weight: 142g/pair Tech Guide: - All the extensions have a 22.2mm diameter in the clamping area. - They are designed for cables to be routed out the rear of the extensions so do not have cable exit holes. Who is it for? The extensions will fit in any aerobar that is designed for 22.2mm. So can be used by any rider wishing to improve the comfort of their aerobar grips.
Profile Design 50a Aluminum Extensions
$51.00
The new range of extensions have evolved from our well proven T-Series. They have been designed to offer distinct fit options. We have also adopted a new naming system whereby the name gives the angle material of the extension. Thus 50a is a 50° bend in aluminum. Performance - The sole purpose of extensions is to provide a comfortable position for the riders hands relative to the armrests. They enhance performance by allowing the rider to relax into their optimal position. Which is why we provide different fit options so each rider can chase their best performance. Fit Data - Extension Shape: A 50a extensions offer a 50° ski bend shape. - The 50a offer a 7.5mm lateral shift per side. This allows the rider to get their hands narrower or wider without tilting the extensions so much that the shifters touch. Origin Recent Trends in aerobar fit have been towards higher hand positions, so we've increased the rise compared to previous generation extensions. We have focused on the most popular angles from our previous range and added the 50a as a multi position option. Tech Guide - All the extensions have a 22.2mm diameter in the clamping area. - They are designed for cables to be routed out the rear of the extensions so do not have cable exit holes. Who is it for? - The extensions will fit in any aerobar that is designed for 22.2mm. So can be used by any rider wishing to improve the comfort of their aerobar grips. - Length: 400mm - Outer Diameter: 22.2mm - Construction: 6061-T6 aluminum, pre-drilled for bar-end shifter cable routing - Weight: 200g/pair
Profile Design Aeroport - Di2 RS910 Adapter
$42.00
The Aeroport RS910 adaptor offers the capability to tidy up Di2 routing on Tri/TT bikes along with improving access for the adjustment and charging. Performance: The Aeroport RS910 adapter fits the BTR2 internal battery and Aeroport RS910 bar end junction into the rear of a set of aluminum series extensions or 35c+ extension.This makes battery placement and cable routing through the frame easier and more secure. As well as avoiding the need for an unsightly mess of cables as typically seen with an EW junction box, or the inconvenience of hiding the junction box in the stem or frame. Compatibility: The adapter is only compatible with 22.2mm OD aluminum series extensions or a 35c+ carbon extension at this stage, with an ID of 19.4mm - Construction: Injected nylon/glass fiber - Clamp Compatibility: 22.2mm OD / 19.4mm ID - Extension Compatibility: 35a, 45/25a, 50a, 35c+ - It is designed to fit the following Di2 parts: RS910 Junction box, BTR2 Internal battery, SD50 cables - Di2 parts are not included with the adapter. - Note that the adapter will not fit in an aerobar like the Profile Design Aeria Evo as the rear of the extension is not accessible
Profile Design Carbon Headset Spacers (1-1/8-inch)
$28.00
Profile Design's lightweight and sleek looking headset spacers are just what you need to make sure your bike functions and looks great. Available in 2, 3, 5, 10, and 20mm thicknesses.
Profile Design Ergo/Race Ultra Armrest Pads
$31.00
The Race and Ergo Ultra pads allow riders to tune their setups for a snug fit. - New foam that resists being crushed for longer periods of time - Improved surface durability - Superior grip with a molded-in textured surface - Compatible with both the Ergo and Race armrest kits - Dimensions: Race (92.9mm x 887.5mm) or Ergo (108.4mm x 87.5mm) - Compatibility: Race / Ergo - Weight: 5mm: 21g / 10mm: 37g
Profile Design F-19 Replacement Pads
$25.00
Profile Design's F-19 Replacement Pads are the correct ones for their F-19 armrests. These pads feature Lycra-covered medium-durometer foam and are held on with Velcro backing.
Profile Design Universal Gap Cap
$17.00
Profile Design's Gap Cap works with 1" or 1 1/8" steer tubes to keep your headset adjusted properly at all times. The composite wedges are a fantastic choice for carbon steerers, and at 30-45 grams, you'll keep the front end of your bike super light.
Profile Design Venturi Arm Rest Kit
$28.00
Profile Design’s Venturi Arm Rest Kit is the correct model for your Profile Design Century Aerobars (sold separately). The foam arm pads have adhesive backing and the kit includes all necessary hardware.
Page 1 of 1