Filter By:
Bottom Brackets
$58.00
- Enables the use of a BB386EVO (30mm spindle) crankset on a 68mm English threaded frame
$37.00 - $56.00
- Left and right bottom bracket cups with standard bearings for FSA MegaExo cranks
- BB-9050 is for 24mm spindle 68/73mm MTB K-Force and Team Issue cranks
- BB-8681 for K-Force Light (a non-ceramic option) and SLK Light Road MegaExo cranks (BB-8681 bearing covers have been redesigned so that the spindle now rides directly on the bearing itself)
- BB-7000 is for 24mm spindle 68/73mm shell MTB Gravity Lite, Moto X and Afterburner cranks
- BB-7000 is for 24mm spindle 83mm shell MTB Gravity Lite cranks
- BB-6200 is for 24mm spindle 68mm shell Energy, Gossamer and Omega No Bolt Design cranks
- BB-6000 is for 24mm spindle 68mm shell Energy, Gossamer and Omega cranks
- BB-4000 is for 19mm spindle 69mm shell Omega cranks
- BB-1000 is for 19mm spindle 68/73mm MTB Gamma cranks
- 1.37" x 24tpi (English threads) or M36 x 24tpi (Italian threads)
$50.99 - $60.00
ISIS revolutionized bottom bracket spindles. Keep yours spinning smoothly with this Platinum ISIS Bottom Bracket from FSA.
- Forged, hollow chromoly spindle with titanium nitride coating
- Integrated, large ball bearing design
- Cold-forged aluminum cups
- Includes crank bolts
$19.00 - $22.00
FSA PowerPro JIS Cartridge Bottom Brackets.
- Includes bolts
- Spindle Interface Type: Square Taper JIS
- BB Shell Width (mm): 68
- BB/Frame Interface: English
$29.00
The FSA Alloy Cup JIS bottom bracket is suitable for Italian threaded interfaces.
- Alloy cups
- Double "snap" seals for water and dirt protection
- Spindle Interface Type: Square Taper JIS
$49.99
- Road sets include bearings, shields, c-clips and wavy washer for bearing retention/tension
- Mountain sets include bearings, shields, c-clips and spacer
- Choose ceramic or stainless steel options
$40.99
There's precious little that's better than a fresh bottom bracket. This complete FSA BB30 Bottom Bracket contains 2 stainless steel bearings, 2 C-Clips, 2 dust covers, and 1 adjustment washer.
$28.00
Running a conventional threaded bottom bracket on your BB30 or PF30 frame doesn't have to be complicated. This press-fit adapter from FSA goes in snug and opens up a lot of crankset possibilities for your BB30/PF30 frame.
- Aluminum
- Allows conventional threaded bottom brackets to be installed in a BB30 or PF30 frame
- Install with headset press (not included) and green Loctite (included)
$58.00
Run your 386EVO crank with your frame that is designed for BB86 Shimano Pressfit bottom brackets with this FSA bottom bracket.
- 2 lines of bearings on each side
$45.00
Bottom brackets from FSA for non-threaded applications.
- Spindle Interface Type: FSA MegaExo 19
- BB Shell Width (mm): 86
- Bottom Bracket Shell I.D.: 41
- BB/Frame Interface: BB86
$19.99
- Enables the use of a MegaExo (24mm spindle) crankset on a BB90 (Trek Madone) frame
- Choose MegaExo carbon (ceramic bearings with red-anodized aluminum shields) or alloy (stainless steel bearings with black plastic shields)
$31.00
Bottom brackets from FSA for non-threaded applications.
- 24mm spindle compatibility
- Stainless steel bearings
- Spindle Interface Type: FSA MegaExo
- BB Shell Width: 92mm
- Bottom Bracket Shell I.D.: 41
- BB/Frame Interface: BB92
$41.00
This FSA MegaExo bottom bracket is for use MTB MegaExo cranksets with 24mm spindles.
- Sealed bearings
- Die-cast then CNC machined alloy bearing cups
- Composite Di2-compatible adjustable center sleeve
$54.99
- Enables the use of a MegaEVO (30mm spindle) crankset on a 68mm English threaded frame
- Compatible with Gravity Gradient MegaEVO 30mm cranks
$31.00
FSA (Full Speed Ahead) MegaExo 19 bottom brackets are for use with 19mm diameter spindles.
- Die cast and CNC-machined alloy bearing cups
- 19mm I.D.
- BB86/92 compatible
- BB Shell Width (mm): 92
- Bottom Bracket Shell I.D.: 41
$59.00
- Die Cast then CNC-machined alloy bearing cups
- Composite DI2 compatible adjustable center sleeve
- 100mm for Fat Bikes
- For use with 100mm MTB NBD MegaExo cranksets
- Spindle Interface Type: FSA MegaExo
- BB Shell Width (mm): 100
- Bottom Bracket Shell I.D.: 1.37
- BB/Frame Interface: English
$36.00
- BBright Bottom Bracket to Mega Exo Carbon Crank BB-PF79 (EE086)
- Spindle Interface Type: FSA MegaExo, Shimano Hollowtech II
- BB Shell Width (mm): 79 – 84.5
- Bottom Bracket Shell I.D.: 46
- BB/Frame Interface: BBright Direct Fit
$39.00
FSA (Full Speed Ahead) MegaExo 19 bottom brackets are for use with 19mm diameter spindles.
- For Alloy Cranks with MegaExo 19 BB-AL86/19/SLE
- Spindle Interface Type: FSA MegaExo 19
- BB Shell Width: 86mm
- Bottom Bracket Shell I.D.: 41
- BB/Frame Interface: BB86
$35.99
This FSA Bottom Bracket allows you to run MegaExo and other 24mm spindle cranksets with a BB86/BB89.5/BB92 frame.
- Intended for road use
- Steel bearings
$59.00
- Spindle Interface Type: 386 EVO
- BB Shell Width: 68mm
- Bottom Bracket Shell I.D.: 46mm
- BB/Frame Interface: T47
- Weight: 95g
Page 1 of 1