Your Search: "repair kit"

Lezyne packed a complete CO2 inflator and tire repair kit in a simple, reusable poly bag. This kit includes a Twin Speed Drive inflator, two threaded 16g CO2 cartridges, Power Levers, and a Smart Kit, all the essentials needed to fill your pack for the unexpected tire repair.

Tubeless repair kit from Muc-Off.

Lezyne's M-Caddy with Sport Repair Kit is a complete and convenient kit for the rider with simple reliability in mind. It features a Sport Drive HP hand pump, RAP 6 multi-tool, Smart Kit for tire repair, and Matrix tire levers in an M-Caddy bag that tucks neatly under your bicycle seat. Be prepared with all the essentials needed for an unexpected repair whether you're out on a long weekend jaunt or daily commute.

Park's Tire and Tube Repair Kit is a riding essential. It features Park’s glueless Super Patch Kit and strong nylon Tire Levers for quick and easy flat repairs. The kit comes with 3 levers, 6 patches in a small container, and a piece of sandpaper (for roughing the tube to prepare it for patching).

Park Tool's Repair Kit features the most common replacement parts for the 100-3C and 100-5C clamps. Includes: • 118s adjusting barrel • 117s eyebolt • 121s adjusting barrel pivot • 136 nut • 116s cap screws (2) • 108s-2 pins (2) • 107s-2 pin (1) • Washers (3) • E-clips (3)

The essential accessories that complement a new bike are key to having the best experience. MSW Ride & Repair Kits combine all those ride essentials into one convenient, money-saving package. Available in several configurations to meet the needs of different types of riding and different types of riders. - This Ride and Repair Kit has a water bottle cage as well as everything needed for common road-side fixes: an eight-piece multi-tool, three tire levers, CO2 inflator & cartridges. - Lightweight composite water-bottle cage - Three MSW tire levers - Eight-piece flat pack multi-tool with 2/3/4/5/6mm hex wrenches, T25 Torx, flathead & Philips screwdrivers - Windstream Push-On CO2 inflator head - Two 20g CO2 cartridges

For all models, including the Back-Roller and Sport-Roller, with Stealth buckles Need to replace a pair of broken buckle? - 2 plastic buckles (male and female ends, 25 mm, black)

Rear Shock Service Kit - Green Sealhead Scraper - Kage (Produced After Jan 1St 2013)

Fit Kit SETQRR contains all the parts to mount the rack to the rear of a road or mountain bike with a 10 x 135mm quick release hub. This kit includes: - 10 x 135mm QR Skewer - A pair of pucks - Clear protective tape - all mounting hardware - Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts - Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame We partner with The Robert Axle Project to supply our thru axles.

Fit Kit SET812 contains all the parts needed to thru-axle mount an Old Man Mountain bike rack to the rear of your bike with a 12mm rear thru-axle. This kit includes: - 12 x 159—165mm thru axle with 1.5 mm thread pitch - A pair of pucks - Clear protective tape - Stainless steel mounting hardware - Axle mounting increases our rack's load capacity to 70lbs/33kg - Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts - Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame We partner with The Robert Axle Project to supply our thru axles. Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.

Fit Kit SET811 contains all the parts needed to thru-axle mount an Old Man Mountain bike rack to the rear of your bike with a 12mm rear thru-axle. This kit includes: - 12 x 168—180mm thru axle with 1.75 mm thread pitch - A pair of pucks - Clear protective tape - Stainless steel mounting hardware - Axle mounting increases our rack's load capacity to 70lbs/33kg - Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts - Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame We partner with The Robert Axle Project to supply our thru axles. Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.

Fit Kit SET814 contains all the parts needed to thru axle mount an Old Man Mountain bike rack to the rear of your bike with a 12mm rear thru axle. This kit includes: - 12 x 169—178mm thru axle with 1.5 mm thread pitch - A pair of pucks - Clear protective tape - Stainless steel mounting hardware - Axle mounting increases our rack's load capacity to 70lbs/33kg - Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts - Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame We partner with The Robert Axle Project to supply our thru axles. Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.

Fit Kit SET808 contains all the parts needed to thru-axle mount an Old Man Mountain bike rack to the rear of your bike with a 12mm rear thru-axle. This kit includes: - 12 x 223—229mm thru axle with 1.5 mm thread pitch - A pair of pucks - Clear protective tape - Stainless steel mounting hardware - Axle mounting increases our rack's load capacity to 70lbs/33kg - Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts - Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame We partner with The Robert Axle Project to supply our thru axles. Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.

Fit Kit SET815 contains all the parts needed to thru axle mount an Old Man Mountain bike rack to the rear of your bike with a 12mm rear thru axle. This kit includes: - 12 x 217—229mm thru axle with 1.0 mm thread pitch - A pair of pucks - Clear protective tape - Stainless steel mounting hardware - Axle mounting increases our rack's load capacity to 70lbs/33kg - Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts - Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame We partner with The Robert Axle Project to supply our thru axles. Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.

Fit Kit SET813 contains all the parts needed to thru axle mount an Old Man Mountain bike rack to the rear of your bike with a 12 mm rear thru axle. This kit includes: - 12 x 154—172mm thru axle with 1.0 mm thread pitch - A pair of pucks - Clear protective tape - Stainless steel mounting hardware - Axle mounting increases our rack's load capacity to 70lbs/33kg - Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts - Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame We partner with The Robert Axle Project to supply our thru axles. Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.

Fit Kit SET826 contains all the parts needed to thru-axle mount an Old Man Mountain bike rack to the rear of your bike with a 12 mm rear thru-axle. This kit includes: - 12 x 175—184mm thru axle with 1.0 mm thread pitch - A pair of pucks - Clear protective tape - Stainless steel mounting hardware - Axle mounting increases our rack's load capacity to 70lbs/33kg - Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts - Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame We partner with The Robert Axle Project to supply our thru axles. Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.

RockShox, 11.4115.129.010, Service Kit, Monarch Plus (does not include air can seals)

• Front reflector (white) • Rear reflector (red)

Rebuild seal kits for Fox rear suspension service and repair. - Includes parts needed for rebuild

GX Eagle Rear Derailleur Pulley Kit

Original equipment rear derailleur pulleys for SRAM rear derailleurs. - NX/SX Eagle Rear Derailleur Pulley Kit

Rear Thru Axle conversion kit for Go-Devil Hubs - Converts QR to 142x12mm thru (axle not included)

All the hardware for the lower portion of your Surly rear rack. Stainless steel.

Authentic service bearing kit for Ritchey mountain bike wheels. - Replacement bearings for Vantage V1 non-2pc hubs

Vivid Air Rear Shock Basic Service Kit - Includes replacement seal, bushing, o-ring, and bottom-out/negative-bumper

Performing the right maintenance on your SRAM and RockShox products not only ensures years of worry-free riding, but will also keep performance optimal and enhance your experience on the bike. Each service interval indicates the maximum number of riding hours designated for each type of recommended maintenance. Depending on the terrain and environmental conditions in your location, your riding style, and skill level, you may see more optimum performance if you service your SRAM and RockShox products at shorter intervals.

Rival eTap AXS Rear Derailleur Pulley Kit - Steel bearings - Includes 12T upper and 12T lower pulleys - 18.5mm and 12.9mm steel pulley screws

The Super Booster rear hub spacer kit is designed to give your 148mm rear thru-axle hubs the extra boost they need to fit any 157mm frame.

REAR SHOCK SERVICE KIT - FULL SERVICE MONARCH 3 RT3 (2013)

RockShox, 11.4118.032.001, Service kit, Vivid Air B1 (Requires Counter Measure tool)

12x142mm conversion endcaps for Hope Pro 2 Evo rear hubs.

Authentic service bearing kit for Ritchey mountain bike and road wheels. - Bearing service kit for 2-piece rear road hubs

Authentic service bearing kit for Ritchey mountain bike and road wheels. - Bearing service kit for Phantom Flange rear hubs Includes #6903 (x1pc) & #699 (x1pc)

For use in adapting 140mm Campagnolo hydraulic rear calipers for use with 160mm rear rotors. - Brake Caliper Type: Flat Mount - Mount | Rotor Size: Rear Flat | 160 Rotor

Booster thru-axle hub spacer kits are designed to give your non-Boost front and rear thru-axle hubs the boost they need to fit any Boost-compatible frame or fork. Kit includes Center Lock Adaptor, allowing riders to use 6-bolt rotors on Shimano Center Lock compatible hubs. - 6mm spacer kit adapts 142 x 12mm rear hub to 148 x 12mm - Includes 6mm adapter to 6-bolt rotors - Includes external spline lock ring for thru-axle compatibility

Force eTap AXS Rear Derailleur Pulley Kit - Steel bearings - 12-Speed

Performing the right maintenance on your SRAM and RockShox products not only ensures years of worry-free riding, but will also keep performance optimal and enhance your experience on the bike. Each service interval indicates the maximum number of riding hours designated for each type of recommended maintenance. Depending on the terrain and environmental conditions in your location, your riding style, and skill level, you may see more optimum performance if you service your SRAM and RockShox products at shorter intervals.

Performing the right maintenance on your SRAM and RockShox products not only ensures years of worry-free riding, but will also keep performance optimal and enhance your experience on the bike. Each service interval indicates the maximum number of riding hours designated for each type of recommended maintenance. Depending on the terrain and environmental conditions in your location, your riding style, and skill level, you may see more optimum performance if you service your SRAM and RockShox products at shorter intervals.

Performing the right maintenance on your SRAM and RockShox products not only ensures years of worry-free riding, but will also keep performance optimal and enhance your experience on the bike. Each service interval indicates the maximum number of riding hours designated for each type of recommended maintenance. Depending on the terrain and environmental conditions in your location, your riding style, and skill level, you may see more optimum performance if you service your SRAM and RockShox products at shorter intervals.

Performing the right maintenance on your SRAM and RockShox products not only ensures years of worry-free riding, but will also keep performance optimal and enhance your experience on the bike. Each service interval indicates the maximum number of riding hours designated for each type of recommended maintenance. Depending on the terrain and environmental conditions in your location, your riding style, and skill level, you may see more optimum performance if you service your SRAM and RockShox products at shorter intervals.

Avid's Rear 170mm Post Bracket Hardware Kit has everything you need to mount a 170mm rotor (sold separately) to the back of your bike. Kits include mounting bolts and a 30mm post mount spacer for rear brake installation.

Replacement spoke kits for DT Swiss PR1400 wheels. - Includes 6 spokes and 6 nipples

- Includes 61803 bearings and one grease syringe - Measurable wattage savings between 1.5 and 9 watts per bearing set, depending on the level and condition of your existing bearings - Note: 88 front and 188v9 rear hubs are on all 2014 and newer Zipp 202, 303, 404, 808 - One kit required for: Zipp 88, 30 and 60 front hubs Zipp 188v8 rear hubs Zipp ALL free hub driver bodies - These 61803 bearings are not interchangable with the 77/177 hub 61803 bearings

Replacement seals for servicing Cane Creek rear shocks.

The Wald 585 rear basket sits atop your bicycle's rear rack. Perfect for hauling full-sized grocery bags, small laptop bags, spare clothes, or maybe even storing your helmet while parked. - 14 x 9 x 9 inches - Fits on rear rack of bicycles - Sturdy steel construction - Made in the USA

Convert your ISO, ISO B, or ISO Superboost DH rear hub to a Shimano Micro Spline compatible driveshell. The conversion kit is complete with an axle, adjustment clamp, driveshell and all driveshell internals for a plug-and-play swap. Micro Spline Driveshell Instructions - Compatible with Shimano Micro Spline cassettes; XTR, XT, and SLX - Compatible with ISO 142x12mm, ISO B 148x12mm, and ISO Superboost DH 157x12mm rear hubs.

Minoura's KCL-2R Rear Carrier is made from welded steel tubing and mounts to the rear of the bicycles. It has an extra large surface area. - Fits 26 to 700c wheels - 11.4 x 16.9 - Max load of 40 lbs. - Durable black powder coat finish - Made of strong steel tubing

Replacement spoke kits for DT Swiss PR1400 wheels. - Includes 6 spokes and 6 nipples

Gnar Dog Volume Reducer Kit

Replacement spoke kits for DT Swiss PR1400 wheels. - Includes 6 spokes and 6 nipples

RockShox Super Deluxe Coil Damper Shafts for service and repair.

Convert your ISO, ISO B, or ISO Superboost DH rear hub to a Shimano Micro Spline compatible driveshell. The conversion kit is complete with an axle, adjustment clamp, driveshell, and all driveshell internals for a plug-and-play swap. Micro Spline Driveshell Instructions - Compatible with Shimano Micro Spline cassettes; XTR, XT, and SLX - Compatible with ISO 142x12mm, ISO B 148x12mm, and ISO Superboost DH 157x12mm rear hubs.

- Includes 61803 bearings and one grease syringe - Measurable wattage savings between 1.5 and 9 watts per bearing set, depending on the level and condition of your existing bearings - These 61803 bearings are not interchangable with the 88/188 hub 61803 bearings

A five-piece IGUS bushing spacer kit for mounting rear shocks. - Compatible with x eyelet shocks using IGUS bushings mounted in the shock eyelet - Select the correct hardware kit for your mounting bolt diameter (e.g. 6mm, 8mm) and frame mount width (e.g. 22mm, 24mm)

RockShox Rear Shock Parts

RockShox Volume Reducer Kits

RockShox Volume Reducer Kits

RockShox Rear Shock Parts

RockShox 32mm Seal Kit for repair and maintenance of Rockshox suspension forks.

RockShox 35mm Seal Kit for repair and maintenance of Rockshox suspension forks.